YOTASEIKI
GTL1600 Profile Machining Center
GTL1600 Profile Machining Center
The GTL1600 linear rail gantry machining center is a medium-sized machine tool that can automatically and continuously complete multiple processes such as milling, drilling, boring, expanding, reaming, spotfacing, and tapping after the workpiece is clamped once. The machine tool is suitable for the processing of multiple varieties and small batches of complex parts such as medium-sized box, plate, disk, valve, shell, profile, etc. The machine tool uses high-precision linear rails and screw rods, which have better dynamic response and can achieve high-speed cutting and low-speed non-creeping. It is widely used in the precision parts, new energy, 3C products, hardware, auto parts, medical equipment industries.
The complete machine structure is a fixed-column gantry structure. The body uses a large and stable base, with high-rigidity large-span crossbeam-shaped columns, ensuring high-speed cutting without vibration or deformation.
PARAMETERS
TABLE
| ITEM |
Parameters： |
| Work table size | 1700×500 mm |
| Permissible mass of workpiece |
600 kg |
| Table working surface configuratin |
5-18×100 mm |
| Gantry through width and height |
150-450 mm |
CAPACITY
| X-axis travel | 1600 mm |
| Y-axis travel | 500 mm |
| Z-axis travel | 300 mm |
SPINDLE
| Spindle speeds |
100-20000 rpm/min-1 |
| Spindle nose |
BT30 |
| Spindle size |
φ100 mm |
| Spindle motor |
5.5 KW |
A.T.C
| Tool capacity |
21/26 |
| Max. tool length |
200 mm |
SYSTEM
| Control system |
MITSUBISHI M80 |
| Power pressure |
0.5-0.8 MPa |
GTL1600 Profile Machining Center
❅The use of a crossbeam X-axis greatly reduces the footprint of the machine.
❅The whole machine is semi-enclosed and protected, with beautiful appearance and convenient operation and maintenance.
❅The large components of the foundation are made of high-quality resin sand molding and high-strength cast iron materials, which gives the machine high rigidity and stable accuracy.
❅The three-axis guideway is loaded by roller linear guide, which features high rigidity, low friction, and low noise.
❅Large diameter C3-grade screw rod with pre-tensioning structure to eliminate some thermal extension, self-lubricating screw rod bearing to extend bearing life
❅The tool magazine adopts 21 or 26 umbrella-type servo knife magazines, which are reliable in quality and stable in performance.
❅The spindle adopts a high-speed spindle unit with a direct connection BT30-20000rpm/min. The front end of the spindle is designed with a labyrinth and features an air curtain protection function to prevent cutting fluid from entering the spindle bearing.
❅The volumetric and forced grease system is configured to ensure good lubrication of all moving parts of the entire machine tool.
❅The machine tool chip removal is equipped with two-sided chip-rolling screw chip removal as standard, and can also be equipped with a chain plate chip removal machine. The front-mounted water tank design is automated, user-friendly, and efficient. The dual-layer water tank filtration system structure provides good cutting fluid for workpiece processing.
CONTACT US
