YOTASEIKI
KS4050 Triple-spindle Machining Center
KS4050 Triple-spindle Machining Center
The KS4050 linear rail type vertical multi-axis machining center is a small-sized machine tool. After the workpiece is clamped once, it can automatically and continuously complete the processing of multiple processes such as milling, drilling, boring, expanding, reaming, spotfacing, tapping, etc. The machine tool is suitable for the processing of multiple varieties of medium and large quantities of complex parts such as small and medium-sized box-type, plate-type, disk-type, valve-type, shell-type, mold-type, etc. The machine tool uses high-precision linear rails and screw rods. It has better dynamic response and can achieve high-speed cutting and low-speed non-creeping. It is widely used in the precision parts, 3C products, hardware, auto parts, medical equipment industries. It is 2.8 times more efficient than ordinary vertical machining centers.
The whole machine structure is a fixed column type, with a cross slide table structure. The body uses a large and stable base, with high-rigidity large-span gantry-shaped columns, for high-speed cutting without vibration or deformation.
PARAMETERS
TABLE
| ITEM |
Parameters： |
| Work table size |
1240×500 mm |
| Permissible mass of workpiece |
300 x 3 kg |
| Table working surface configuratin |
5-14×85 mm |
| Gantry through width and height |
1260/380 mm |
CAPACITY
| X-axis travel |
400mm x 3 |
| Y-axis travel |
500 mm |
| Z-axis travel |
300mm x 3 |
SPINDLE
| Spindle speeds |
100-28000 rpm/min-1 |
| Spindle nose |
BBT30 |
| Transmission |
Electric spindle |
| Spindle motor |
5.5 KW |
A.T.C
| Tool capacity |
20 |
| Max. tool length |
150 mm |
SYSTEM
| Control system |
SYNTEC 220MA-5 |
| Power pressure |
0.5-0.8 MPa |
Multi Axis Machine Center KS4050
★ The whole machine is fully enclosed and protected, with beautiful machine design and convenient operation and maintenance.
★ The large-sized components are made of high-quality resin sand molding and high-strength cast iron materials, which ensures high rigidity and stable accuracy of the machine tool.
★ The three-axis guideway adopts roller linear guideway for load-bearing, with high rigidity, low friction, and low noise.
★ Large diameter C3 grade screw rod with pre-tensioning structure to eliminate some thermal extension, self-lubricating screw rod bearing to extend bearing life.
★ The tool library uses 20 servo-type tool libraries with reliable quality and stable performance.
★ The spindle adopts a high-speed spindle unit with a power distribution spindle BBT30-20000rpm/min. The front end of the spindle is designed with a labyrinth and equipped with an air curtain protection function to prevent cutting fluid from entering the spindle bearing.
★ It is equipped with positive displacement and forced lubrication systems to ensure good lubrication of all moving parts of the machine tool
★ The machine tool chip removal is equipped with front flushing chip removal on both sides of the slope, with a side-mounted water tank design, automation, humanization, and high efficiency. The dual-layer water tank filtration system structure provides good cutting fluid for workpiece processing.
★ Equipped with a high-performance SYNTEC 220MA CNC system, it ensures the stability of machine tool control and also ensures the CNC machining functions and auxiliary functions required by users.
CONTACT US
